How to do Pan & Tilt Correction on Mercusys cameras

The Pan & Tilt Correction feature can help reset your camera's Lens to the default position. If the horizontal and vertical range changes during the mounting process or under other circumstances, please refer to the following steps to take Pan & Tilt Correction.

Note: Only Pan/Tilt cameras have the Pan & Tilt Correction feature.

Here we take MC210 as an example.

Method 1

1. After setting up your Mercusys camera successfully, go to the camera page and then tap the Manage icon to enter the camera Live View page.

Tap the Manage icon to enter the Live view page.

2. On the camera live view page. Tap the Pan & Tilt option, and then you will see the Pan & Tilt icon. Then, you can tap Pan & Tilt Correction to reset your camera Lens to the default position.

The Pan & Tilt option is at the below of the live view. Click the three vertical lines on the right and the Pan & Tilt Correction will show up.

Set how many degrees the camera will move per tap of the Pan & Tilt.

Method 2

1. After setting up your Mercusys camera successfully, go to the camera page and then tap the Manage icon to enter the camera Live View page.

2. Tap the gear icon to enter the camera settings page.

Tap the gear icon to enter at the top right corner to enter the camera settings page.

3. Tap Pan & Tilt to enter the page. Then you can tap Pan & Tilt Correction to reset your camera Lens to the default position.

Tap the Pan & Tilt option on the camera settings page. The Pan & Tilt Correction is on the Pan & tilt page.